Kobe Aluminum Automotive Products to expand production facilities for aluminum forged suspension products
- (former)Metals
2017-04-28
TOKYO, April 28, 2017 -- Kobe Aluminum Automotive Products, LLC (or KAAP), a U.S. joint venture, plans to further expand its production facilities to meet the rising demand in North America for aluminum forged suspension products.
Based in Bowling Green, Kentucky, KAAP decided in November 2015 to install a melting and casting line and two forging presses. Mass production is scheduled to begin in summer 2017. When this capital investment is completed, KAAP will have three melting and casting lines and eight forging presses. Production capacity will increase from the current 540,000 pieces per month to 750,000 pieces per month.
In the latest expansion plan announced today, KAAP plans to invest approximately US$53 million (about 5.8 billion yen) to install an additional melting and casting line and two forging presses. Startup is to begin in stages starting from autumn 2018, with completion slated for early 2019. KAAP anticipates hiring 100 more people.
When the latest capital investment is completed, KAAP will have a total of four melting and casting lines and 10 forging presses. Production capacity will increase to 970,000 pieces per month, and employees are anticipated to total 600 people.
KAAP was established in 2003 as a joint venture by Kobe Steel, Mitsui & Co., Ltd. and Toyota Tsusho Corporation to produce aluminum forged suspension products in the United States. Ever since it began production in 2005, KAAP has maintained the top share of the North American market for aluminum forged suspension products.
The United States is the world's second-largest automobile market, and car production is anticipated to continue growing. Production of approximately 17.5 million cars in 2016 is projected to increase to 19 million cars in 2020.
Owing to their light weight, aluminum forged suspensions contribute to improving the fuel economy of cars. Demand has been rising due to the increasing need to reduce the weight of car bodies in response to environmental regulations.
KAAP began by supplying mainly Japanese automakers in the United States. It now supplies U.S. automakers, too. KAAP anticipates that in the future automakers will use aluminum forged suspension products in a wider range of vehicles.
This latest expansion will further contribute to solidifying KAAP's position in the North American market for aluminum forged suspension products.
Outline of Seventh Expansion
Extension of building
|
About 13,000 sq m (140,000 sq ft) |
---|---|
Equipment
|
1 melting and casting line, 2 forging presses, auxiliary equipment |
Investment amount
|
About $53 million |
No. of employees to be hired
|
About 100 (when in full operation) |
Start-up of equipment
|
To begin in stages from autumn 2018 |
Overview of Capital Investment Plans
Current | Ongoing Expansion Plan | Latest Expansion Plan | After Completion | |
---|---|---|---|---|
Land area
|
130,000 sq m
(1,399,000 sq ft) |
120,000 sq m
(1,292,000 sq ft) |
--- |
250,000 sq m (2,691,000 sq ft) |
Buildings
|
22,000 sq m
(236,800 sq ft) |
11,000 sq m
(118,400 sq ft) |
13,000 sq m
(140,000 sq ft) |
46,000 sq m (495,200 sq ft) |
Melting & casting lines
|
2
|
1
|
1
|
4 |
Forging presses
|
6
|
2
|
2 | 10 |
Production capacity (pieces per month) | 540,000 | +210,000 | +220,000 | 970,000 |
Profile of Kobe Aluminum Automotive Products, LLC
Location
|
Bowling Green, Kentucky, USA |
---|---|
Established
|
May 2003 |
President
|
Toshihiro Katsura |
Employees
|
About 500 (as of March 2017) |
Capital
|
US$24 million |
Shareholder composition
|
Kobe Steel, Ltd. 60% Mitsui & Co., Ltd. 25% Toyota Tsusho Corporation 15% |
Media Contact
Gary Tsuchida
Kobe Steel, Ltd.
Tokyo, Japan
Tel +81-(0)3-5739-6010
The information in this release is current as of the date of announcement.
Please note that information may change after the date of announcement. Thank you in advance for your understanding.